Product Details
SalTec Powerlink offers Smart Sine Series Pure Sine wave UPS for all type of critical application. It is capable of handling all types of PC, Servers, Communication & Network Devices, Power-hungry & Power-Sensitive equipments.
Available in both standard and long back-up models. Extensive LCD display shows the status of UPS.
Features & Benefits:
Pure Sine wave, <3% THD on inverter/mains ensure smooth power to critical equipment
Built-AVR Provides regulated output through buck & boost stabilizer
To prevent the load from intransient surges during switching between main and batteries
Intelligent multi-state charging optimizes the battery life through controlled charging
Auto charging maintains the batteries float level despite the UPS output is switched off
Protects connected equipment against mains, transients, surges, under / over voltage and abrupt shut down
Input fuse, surge suppressor, EMI / RFI & over temperature
Wide input range to be compatible with generator output
SNMP / HTTP communication interface for the remote site power monitoring
Extended backup model having heavy duty charger ensure smooth extended operation on dry & wet batteries.
Warranty: 1 Year for UPS – 6 Months for Battery
Product Specifications
INPUT
Input Supply: Single Phase
Voltage Range: 165-280 Vac, 50Hz
Connection: Hard-wired Screw Terminals
Protection: Input Fuse, Transient / Surge Suppressor, EMI/RFI Filter Over Temperature.
OUTPUT
Voltage AC Mode: 220 VAC (Typical), Single Phase, 50Hz
Frequency: 50Hz
Connection: 4 x IEC and Hard-wire Screw Terminals
BACKUP
Voltage: 220 + 3% Single Phase, 50Hz
Waveform: Pure Sine wave, <3 % THD
Protection: Low battery, Overload, Battery Fuse, Battery over Charge / Deep Discharge, over Temperature
Battery Type: Dry Sealed Maintenance-free Batteries/ Lead Acid Automotive Batteries
GENERAL
Topology: Line Interactive
Transfer Time: 2-4ms, Phase Synchronized to Mains
Cold Start: UPS Activation without Mains
Power Control: Front Panel Switch
Interface: Smart RS-232, UPS Software or SNMP Adapter (Optional)
Safety Approval: CE
Operating Conditions: 0°C to 40°C Ambient Temperature, 0% to 90% RH (Non Condensing)
Audible Indications: On Backup, Overload, Low Battery, Battery Fail, UPS Fault, Thermal Shutdown
Visual Indications: AC in/out, Battery V. Internal Temp,. On Mains, On Backup, AVR, UPS Fault (LCD Display) Load & Battery Bar, Low Battery, Battery Replacement, Overload & Thermal Shutdown
Battery: 72 VDC
Dimensions (HxWxD) mm: 200x180x510
Net Weight (Kg): 28 (w/o batteries) / 31 (w/o batteries) / 34 (w/o batteries)
